# Use this hook to configure devise mailer, warden hooks and so forth. The first
# four configuration values can also be set straight in your models.
Devise.setup do |config|
  # ==> Mailer Configuration
  # Configure the e-mail address which will be shown in DeviseMailer.
  config.mailer_sender = 'please-change-me@config-initializers-devise.com'

  # Configure the class responsible to send e-mails.
  config.mailer = 'Spree::UserMailer'

  # ==> ORM configuration
  # Load and configure the ORM. Supports :active_record (default) and
  # :mongoid (bson_ext recommended) by default. Other ORMs may be
  # available as additional gems.
  require 'devise/orm/active_record'

  # ==> Configuration for any authentication mechanism
  # Configure which keys are used when authenticating an user. By default is
  # just :email. You can configure it to use [:username, :subdomain], so for
  # authenticating an user, both parameters are required. Remember that those
  # parameters are used only when authenticating and not when retrieving from
  # session. If you need permissions, you should implement that in a before filter.
  # config.authentication_keys = [ :email ]

  # Tell if authentication through request.params is enabled. True by default.
  # config.params_authenticatable = true

  # Tell if authentication through HTTP Basic Auth is enabled. False by default.
  config.http_authenticatable = true

  # Set this to true to use Basic Auth for AJAX requests.  True by default.
  #config.http_authenticatable_on_xhr = false

  # The realm used in Http Basic Authentication
  config.http_authentication_realm = 'Spree Application'

  # ==> Configuration for :database_authenticatable
  # For bcrypt, this is the cost for hashing the password and defaults to 10. If
  # using other encryptors, it sets how many times you want the password re-encrypted.
  config.stretches = Rails.env.test? ? 1 : 20

  # Setup a pepper to generate the encrypted password.
  config.pepper = Rails.configuration.secret_key_base

  # ==> Configuration for :confirmable
  # The time you want to give your user to confirm his account. During this time
  # he will be able to access your application without confirming. Default is nil.
  # When confirm_within is zero, the user won't be able to sign in without confirming.
  # You can use this to let your user access some features of your application
  # without confirming the account, but blocking it after a certain period
  # (ie 2 days).
  # config.confirm_within = 2.days

  # ==> Configuration for :rememberable
  # The time the user will be remembered without asking for credentials again.
  # config.remember_for = 2.weeks

  # If true, a valid remember token can be re-used between multiple browsers.
  # config.remember_across_browsers = true

  # If true, extends the user's remember period when remembered via cookie.
  # config.extend_remember_period = false

  # ==> Configuration for :validatable
  # Range for password length
  # config.password_length = 6..20

  # ==> Configuration for :timeoutable
  # The time you want to timeout the user session without activity. After this
  # time the user will be asked for credentials again.
  # config.timeout_in = 10.minutes

  # ==> Configuration for :lockable
  # Defines which strategy will be used to lock an account.
  # :failed_attempts = Locks an account after a number of failed attempts to sign in.
  # :none            = No lock strategy. You should handle locking by yourself.
  # config.lock_strategy = :failed_attempts

  # Defines which strategy will be used to unlock an account.
  # :email = Sends an unlock link to the user email
  # :time  = Re-enables login after a certain amount of time (see :unlock_in below)
  # :both  = Enables both strategies
  # :none  = No unlock strategy. You should handle unlocking by yourself.
  # config.unlock_strategy = :both

  # Number of authentication tries before locking an account if lock_strategy
  # is failed attempts.
  # config.maximum_attempts = 20

  # Time interval to unlock the account if :time is enabled as unlock_strategy.
  # config.unlock_in = 1.hour

  # ==> Scopes configuration
  # Turn scoped views on. Before rendering 'sessions/new', it will first check for
  # 'users/sessions/new'. It's turned off by default because it's slower if you
  # are using only default views.
  # config.scoped_views = true

  # Configure the default scope given to Warden. By default it's the first
  # devise role declared in your routes.
  # Add a default scope to devise, to prevent it from checking
  # whether other devise enabled models are signed into a session or not
  config.default_scope = :spree_user

  # Configure sign_out behavior.
  # By default sign_out is scoped (i.e. /users/sign_out affects only :user scope).
  # In case of sign_out_all_scopes set to true any logout action will sign out all active scopes.
  # config.sign_out_all_scopes = false

  # ==> Navigation configuration
  # Lists the formats that should be treated as navigational. Formats like
  # :html, should redirect to the sign in page when the user does not have
  # access, but formats like :xml or :json, should return 401.
  # If you have any extra navigational formats, like :iphone or :mobile, you
  # should add them to the navigational formats lists. Default is [:html]
  config.navigational_formats = [:html, :json, :xml]

  # ==> Warden configuration
  # If you want to use other strategies, that are not (yet) supported by Devise,
  # you can configure them inside the config.warden block. The example below
  # allows you to setup OAuth, using http://github.com/roman/warden_oauth
  #
  # config.warden do |manager|
  #   manager.oauth(:twitter) do |twitter|
  #     twitter.consumer_secret = <YOUR CONSUMER SECRET>
  #     twitter.consumer_key  = <YOUR CONSUMER KEY>
  #     twitter.options :site => 'http://twitter.com'
  #   end
  #   manager.default_strategies(:scope => :user).unshift :twitter_oauth
  # end
  #
  # Time interval you can reset your password with a reset password key.
  # Don't put a too small interval or your users won't have the time to
  # change their passwords.
  config.reset_password_within = 6.hours
  config.sign_out_via = :get

  config.case_insensitive_keys = [:email]
end

Devise::TokenAuthenticatable.setup do |config|
  # Defines name of the authentication token params key
  config.token_authentication_key = :auth_token
end

if ENV["OPENID_APP_ID"].present? && ENV["OPENID_APP_SECRET"].present?
  Devise.setup do |config|
    site = if Rails.env.development?
             # The lescommuns server accepts localhost:3000 as valid.
             # So you can test in development.
             "http://localhost:3000"
           else
             "https://#{ENV["SITE_URL"]}"
           end
    config.omniauth :openid_connect, {
      name: :openid_connect,
      issuer: "https://login.lescommuns.org/auth/realms/data-food-consortium",
      scope: [:openid, :profile, :email, :offline_access],
      response_type: :code,
      uid_field: "email",
      discovery: true,
      client_auth_method: :jwks,

      client_options: {
        identifier: ENV["OPENID_APP_ID"],
        secret: ENV["OPENID_APP_SECRET"],
        redirect_uri: "#{site}/user/spree_user/auth/openid_connect/callback",
        jwks_uri: 'https://login.lescommuns.org/auth/realms/data-food-consortium/protocol/openid-connect/certs'
      }
    }
  end
end