Maikel Linke
d72bc49409
Compare coverage to upstream master when on fork
2025-07-31 14:56:17 +10:00
Gaetan Craig-Riou
81c75b2b71
Do not run undercover on the master branch
...
No need to compare master to itself.
2025-07-02 10:12:28 +10:00
filipefurtad0
e0efb34fe8
Adds undercover command to the build file
...
build setup patch
2025-06-27 12:24:22 +01:00
Maikel Linke
0cf9cf3122
Combine system specs for better balance
2025-05-08 12:11:28 +10:00
Maikel Linke
87f81a51d4
Test system with more workers
...
System specs have been quite slow, taking up to 10 minutes per worker.
But now that we freed up a worker from linting and two workers from
models, we can add these to the system specs to reduce the time to test
completion.
2025-05-06 11:44:38 +10:00
Maikel Linke
1b7aa6406f
Test controllers and models in one job
...
The execution time is relatively low but reducing the model workers from
2 to 1 would increase the execution time too much. Combining controllers
and models allows for better balancing.
2025-05-06 11:44:38 +10:00
Maikel Linke
ba46b597f5
Run all linters in the same job
...
This saves a bit of setup time. And it frees up a worker for the main
integration tests.
2025-05-06 11:31:41 +10:00
Maikel Linke
5cb2d0e061
Remove defunct Mapi workflow
...
A contributor added this workflow to promote their service. But we never
found a use for it and at some point it broke because we didn't update
it. It has been disabled for two years now. Let's clean it up.
2025-05-06 11:25:56 +10:00
Maikel Linke
4c6d7148b5
Remove custom brakeman config, now using default
...
I activated the default Brakeman config via Github security settings.
2025-05-06 11:25:12 +10:00
Maikel Linke
73ae43302e
Update deprecated Reviewdog option
2025-03-06 12:55:56 +11:00
Maikel Linke
e1f62148c9
Remove now unnecessary country seeding for assets
2025-01-28 13:26:42 +11:00
Maikel Linke
95625c16b2
Comment on seeds
2025-01-24 16:55:19 +11:00
Maikel Linke
690d137971
Combine rake tasks for efficiency
2025-01-24 16:54:56 +11:00
Maikel Linke
f21f8f38da
Compile assets on demand in test environment
...
We still do it in CI to prevent flaky specs. Otherwise, when a spec
needs to compile assets, it may time out.
2025-01-24 12:10:09 +11:00
Maikel Linke
ca12e35537
Reduce parallel CI runs from 45 to 27
...
This should shave off 18 minutes of overhead time for 18 fewer worker
runs in total. It also means that forks with only 20 parallel worker
should complete quicker.
2025-01-21 16:20:21 +11:00
Maikel Linke
6b76fbc817
Fix artifact download for Simplecov collation
...
v4 of the artifact actions works differently to v3.
2025-01-15 12:44:34 +11:00
Neal Chambers
21b7e6e567
Use Dockerv2
2024-09-26 09:21:00 +09:00
Maikel Linke
05b25c78bb
Bump all artifact actions to v4
2024-09-05 09:57:05 +10:00
dependabot[bot]
74bbc7c3c0
Bump actions/download-artifact from 3 to 4.1.7 in /.github/workflows
...
Bumps [actions/download-artifact](https://github.com/actions/download-artifact ) from 3 to 4.1.7.
- [Release notes](https://github.com/actions/download-artifact/releases )
- [Commits](https://github.com/actions/download-artifact/compare/v3...v4.1.7 )
---
updated-dependencies:
- dependency-name: actions/download-artifact
dependency-type: direct:production
...
Signed-off-by: dependabot[bot] <support@github.com >
2024-09-04 07:13:07 +00:00
Joseph Johansen
fd2cbb67db
Enable include-hidden-files for upload code coverage chunks
2024-09-03 18:50:34 +01:00
Joseph Johansen
4a028b2238
Fix artifact path for simplecov report upload
2024-08-28 11:09:01 +01:00
Maikel
43a366005c
Merge pull request #12798 from johansenja/enable-simplecov
...
Set up code coverage metrics with simplecov
2024-08-28 12:07:53 +10:00
Joseph Johansen
85385a1989
Rename uploads so combined report is listed first alphabetically
2024-08-23 11:26:45 +01:00
Joseph Johansen
a816814819
Update CI workflow to upload results and call rake task
2024-08-23 11:26:41 +01:00
Ahmed Ejaz
ed61f7e7bc
12783: use unique artifact name based on node index
2024-08-19 22:57:04 +05:00
Ahmed Ejaz
734aebbaaa
update uploaded artifact names to be different
2024-08-13 00:42:59 +05:00
EdwardLi-coder
be13d43e0c
delete Archive failed tests screenshots
2024-08-11 00:20:18 +08:00
EdwardLi-coder
da24638079
update artifact v3 to v4
2024-08-10 22:04:17 +08:00
Ahmed Ejaz
feb1fa1198
12603 - add auto-author-assign workflow
2024-06-25 12:20:24 +05:00
David Cook
4023dc2265
Cache yarn dependencies
...
I don't know what this actually does, because it doesn't install the dependencies, that still needs to happen next.
But surely any cache is a good thing?
2024-06-18 13:09:45 +10:00
David Cook
5ff89a279c
Use Spring to save on subsequent boot times
...
Each time we run a rails command, it can take some time to load up (I think it was 20s). We run two commands (db setup, then rspec), so the second one should be faster now.
2024-05-22 09:21:51 +10:00
David Cook
85165369a2
Move run runner over for system specs.
2024-05-22 09:21:51 +10:00
David Cook
7e951d4af2
Revert "Separate controllers requiring webpack for testing"
...
Arrgh it's not so simple.
It looks like both rspec and knapsack use glob for the pattern, so the pattern needs updating. Hmm that might not be too
bad, but it makes it even less manageable.
Considering the system specs are a much bigger bottleneck, I'm going to avoid spending more time here.
2024-04-29 17:12:38 +10:00
David Cook
aeae16a1b4
Separate controllers requiring webpack for testing
2024-04-29 17:12:19 +10:00
David Cook
55ece0553c
Revert. JS is still required for most specs
...
But models can still run without.
Half of the controller runs also succeeded, so we could potentially separate those ones out.
Hmm, yes only 7 of them. It would save 20s, or 16% of controller CI runtimesi which are 2min. let's try..
2024-04-29 17:02:09 +10:00
David Cook
1a55ae2035
Skip JS setup for non-JS tests
...
These tests don't run in the browser, therefore shouldn't need JavaScript at all.
2024-04-29 17:02:09 +10:00
David Cook
ce36b81f15
Run multiple rake tasks in one process
...
It saves the second unnecessary Rails boot-up (multiple seconds).
2024-04-29 17:02:09 +10:00
David Cook
6eaf0a00a0
Revert. Rails is required for the Karma rake script
...
But surely we could convert it to a shell or node script. Maybe next time..
2024-04-29 17:01:22 +10:00
David Cook
7c53c25aaf
Skip Ruby setup for non-Ruby tests
...
Conversely, these tests are JS-only.
2024-04-29 17:00:56 +10:00
Maikel Linke
eb791bed27
Test all files with Rubocop, not just added code in the diff
2024-04-17 09:44:43 +10:00
Gaetan Craig-Riou
927acf01f6
Fix reviewdog extension config
...
We need to use a string list of extensions as shown in the doc:
https://github.com/reviewdog/action-rubocop?tab=readme-ov-file#example-usage
2024-02-26 20:25:49 +11:00
David Cook
0091a60a6e
Install rubocop-rspec
...
Why not enforce more consistency in our specs also?
Some of them generated way too many violations, so I relaxed them a bit.
2024-02-23 12:03:55 +11:00
David Cook
52fb4f5287
Remove unused workflow
...
Sadly this one can't work for PRs created from forks.
2023-09-21 16:42:27 +10:00
David Cook
ec29038372
Remove unnecessary space
2023-09-21 15:54:40 +10:00
David Cook
23959c96bc
Send a Slack notification when api-changes PRs are merged
2023-09-21 15:53:34 +10:00
Maikel Linke
7654d37fc3
DRY, shorten swagger file names
2023-09-11 14:57:39 +10:00
filipefurtad0
0d1f3f82fd
Balances build time
...
Two nodes were removed from models and three engines; these were and added to system_consumer and system_admin, respectively
2023-08-28 10:28:14 +01:00
filipefurtad0
3a6ca38432
Renames Knapsack nodes
2023-08-28 10:28:14 +01:00
Matt-Yorkley
613802f477
Update stage.yml
2023-08-11 13:50:34 +01:00
Matt-Yorkley
99907dc3a6
Update stage.yml
2023-08-11 13:48:31 +01:00
